You cannot select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.

1043 lines
62 KiB
XML

<?xml version="1.0"?>
<doc>
<assembly>
<name>K4os.Compression.LZ4</name>
</assembly>
<members>
<member name="T:K4os.Compression.LZ4.Encoders.EncoderAction">
<summary>
Action performed by encoder using <c>FlushAndEncode</c> method.
</summary>
</member>
<member name="F:K4os.Compression.LZ4.Encoders.EncoderAction.None">
<summary>Nothing has happened, most likely loading 0 bytes.</summary>
</member>
<member name="F:K4os.Compression.LZ4.Encoders.EncoderAction.Loaded">
<summary>Some bytes has been loaded into encoder.</summary>
</member>
<member name="F:K4os.Compression.LZ4.Encoders.EncoderAction.Copied">
<summary>Compression was not possible so bytes has been copied.</summary>
</member>
<member name="F:K4os.Compression.LZ4.Encoders.EncoderAction.Encoded">
<summary>Compression succeeded.</summary>
</member>
<member name="T:K4os.Compression.LZ4.Encoders.ILZ4Decoder">
<summary>
Interface of LZ4 decoder used by LZ4 streams.
</summary>
</member>
<member name="P:K4os.Compression.LZ4.Encoders.ILZ4Decoder.BlockSize">
<summary>Block size.</summary>
</member>
<member name="P:K4os.Compression.LZ4.Encoders.ILZ4Decoder.BytesReady">
<summary>Bytes already decoded and available to be read.
Always smaller than <see cref="P:K4os.Compression.LZ4.Encoders.ILZ4Decoder.BlockSize"/></summary>
</member>
<member name="M:K4os.Compression.LZ4.Encoders.ILZ4Decoder.Decode(System.Byte*,System.Int32,System.Int32)">
<summary>
Decodes previously compressed block and caches decompressed block in decoder.
Returns number of bytes decoded. These bytes can be read with <see cref="M:K4os.Compression.LZ4.Encoders.ILZ4Decoder.Drain(System.Byte*,System.Int32,System.Int32)" />.
</summary>
<param name="source">Points to compressed block.</param>
<param name="length">Length of compressed block.</param>
<param name="blockSize">Size of the block. Value <c>0</c> indicates default block size.</param>
<returns>Number of decoded bytes.</returns>
</member>
<member name="M:K4os.Compression.LZ4.Encoders.ILZ4Decoder.Inject(System.Byte*,System.Int32)">
<summary>
Inject already decompressed block and caches it in decoder.
Used with uncompressed-yet-chained blocks and pre-made dictionaries.
These bytes can be read with <see cref="M:K4os.Compression.LZ4.Encoders.ILZ4Decoder.Drain(System.Byte*,System.Int32,System.Int32)" />.
</summary>
<param name="source">Points to uncompressed block.</param>
<param name="length">Length of uncompressed block.</param>
<returns>Number of decoded bytes.</returns>
</member>
<member name="M:K4os.Compression.LZ4.Encoders.ILZ4Decoder.Drain(System.Byte*,System.Int32,System.Int32)">
<summary>
Reads previously decoded bytes. Please note, <paramref name="offset"/> should be
negative number, pointing to bytes before current head.
</summary>
<param name="target">Buffer to write to.</param>
<param name="offset">Offset in source buffer relatively to current head.
Please note, it should be negative value.</param>
<param name="length">Number of bytes to read.</param>
</member>
<member name="T:K4os.Compression.LZ4.Encoders.ILZ4Encoder">
<summary>
Interface of LZ4 encoder used by LZ4 streams.
</summary>
</member>
<member name="P:K4os.Compression.LZ4.Encoders.ILZ4Encoder.BlockSize">
<summary>Block size.</summary>
</member>
<member name="P:K4os.Compression.LZ4.Encoders.ILZ4Encoder.BytesReady">
<summary>Number of bytes read for compression.
Always smaller than <see cref="P:K4os.Compression.LZ4.Encoders.ILZ4Encoder.BlockSize"/></summary>
</member>
<member name="M:K4os.Compression.LZ4.Encoders.ILZ4Encoder.Topup(System.Byte*,System.Int32)">
<summary>Adds bytes to internal buffer. Increases <see cref="P:K4os.Compression.LZ4.Encoders.ILZ4Encoder.BytesReady"/></summary>
<param name="source">Source buffer.</param>
<param name="length">Source buffer length.</param>
<returns>Number of bytes topped up. If this function returns 0 it means that buffer
is full (<see cref="P:K4os.Compression.LZ4.Encoders.ILZ4Encoder.BytesReady"/> equals <see cref="P:K4os.Compression.LZ4.Encoders.ILZ4Encoder.BlockSize"/>) and
<see cref="M:K4os.Compression.LZ4.Encoders.ILZ4Encoder.Encode(System.Byte*,System.Int32,System.Boolean)"/> should be called to flush it.</returns>
</member>
<member name="M:K4os.Compression.LZ4.Encoders.ILZ4Encoder.Encode(System.Byte*,System.Int32,System.Boolean)">
<summary>
Encodes bytes in internal buffer (see: <see cref="P:K4os.Compression.LZ4.Encoders.ILZ4Encoder.BytesReady"/>, <see cref="M:K4os.Compression.LZ4.Encoders.ILZ4Encoder.Topup(System.Byte*,System.Int32)"/>).
If <paramref name="allowCopy"/> is <c>true</c> then if encoded buffer is bigger than
source buffer source bytes are copied instead. In such case returned length is negative.
</summary>
<param name="target">Target buffer.</param>
<param name="length">Target buffer length.</param>
<param name="allowCopy">Indicates if copying is allowed.</param>
<returns>Length of encoded buffer. Negative if bytes are just copied.</returns>
</member>
<member name="T:K4os.Compression.LZ4.Encoders.LZ4BlockDecoder">
<summary>
LZ4 decoder used with independent blocks mode. Plase note, that it will fail
if input data has been compressed with chained blocks
(<see cref="T:K4os.Compression.LZ4.Encoders.LZ4FastChainEncoder"/> and <see cref="T:K4os.Compression.LZ4.Encoders.LZ4HighChainEncoder"/>)
</summary>
</member>
<member name="P:K4os.Compression.LZ4.Encoders.LZ4BlockDecoder.BlockSize">
<inheritdoc />
</member>
<member name="P:K4os.Compression.LZ4.Encoders.LZ4BlockDecoder.BytesReady">
<inheritdoc />
</member>
<member name="M:K4os.Compression.LZ4.Encoders.LZ4BlockDecoder.#ctor(System.Int32)">
<summary>Creates new instance of block decoder.</summary>
<param name="blockSize">Block size. Must be equal or greater to one used for compression.</param>
</member>
<member name="M:K4os.Compression.LZ4.Encoders.LZ4BlockDecoder.Decode(System.Byte*,System.Int32,System.Int32)">
<inheritdoc />
</member>
<member name="M:K4os.Compression.LZ4.Encoders.LZ4BlockDecoder.Inject(System.Byte*,System.Int32)">
<inheritdoc />
</member>
<member name="M:K4os.Compression.LZ4.Encoders.LZ4BlockDecoder.Drain(System.Byte*,System.Int32,System.Int32)">
<inheritdoc />
</member>
<member name="M:K4os.Compression.LZ4.Encoders.LZ4BlockDecoder.ReleaseUnmanaged">
<inheritdoc />
</member>
<member name="T:K4os.Compression.LZ4.Encoders.LZ4BlockEncoder">
<summary>
Independent block encoder. Produces larger files but uses less memory and
gives better performance.
</summary>
</member>
<member name="M:K4os.Compression.LZ4.Encoders.LZ4BlockEncoder.#ctor(K4os.Compression.LZ4.LZ4Level,System.Int32)">
<summary>Creates new instance of <see cref="T:K4os.Compression.LZ4.Encoders.LZ4BlockEncoder"/></summary>
<param name="level">Compression level.</param>
<param name="blockSize">Block size.</param>
</member>
<member name="M:K4os.Compression.LZ4.Encoders.LZ4BlockEncoder.EncodeBlock(System.Byte*,System.Int32,System.Byte*,System.Int32)">
<inheritdoc />
</member>
<member name="M:K4os.Compression.LZ4.Encoders.LZ4BlockEncoder.CopyDict(System.Byte*,System.Int32)">
<inheritdoc />
</member>
<member name="T:K4os.Compression.LZ4.Encoders.LZ4ChainDecoder">
<summary>LZ4 decoder handling dependent blocks.</summary>
</member>
<member name="M:K4os.Compression.LZ4.Encoders.LZ4ChainDecoder.#ctor(System.Int32,System.Int32)">
<summary>Creates new instance of <see cref="T:K4os.Compression.LZ4.Encoders.LZ4ChainDecoder"/>.</summary>
<param name="blockSize">Block size.</param>
<param name="extraBlocks">Number of extra blocks.</param>
</member>
<member name="P:K4os.Compression.LZ4.Encoders.LZ4ChainDecoder.BlockSize">
<inheritdoc />
</member>
<member name="P:K4os.Compression.LZ4.Encoders.LZ4ChainDecoder.BytesReady">
<inheritdoc />
</member>
<member name="M:K4os.Compression.LZ4.Encoders.LZ4ChainDecoder.Decode(System.Byte*,System.Int32,System.Int32)">
<inheritdoc />
</member>
<member name="M:K4os.Compression.LZ4.Encoders.LZ4ChainDecoder.Inject(System.Byte*,System.Int32)">
<inheritdoc />
</member>
<member name="M:K4os.Compression.LZ4.Encoders.LZ4ChainDecoder.Drain(System.Byte*,System.Int32,System.Int32)">
<inheritdoc />
</member>
<member name="M:K4os.Compression.LZ4.Encoders.LZ4ChainDecoder.ReleaseUnmanaged">
<inheritdoc />
</member>
<member name="T:K4os.Compression.LZ4.Encoders.LZ4Decoder">
<summary>
Static class with factory methods to create LZ4 decoders.
</summary>
</member>
<member name="M:K4os.Compression.LZ4.Encoders.LZ4Decoder.Create(System.Boolean,System.Int32,System.Int32)">
<summary>Creates appropriate decoder for given parameters.</summary>
<param name="chaining">Dependent blocks.</param>
<param name="blockSize">Block size.</param>
<param name="extraBlocks">Number of extra blocks.</param>
<returns>LZ4 decoder.</returns>
</member>
<member name="T:K4os.Compression.LZ4.Encoders.LZ4Encoder">
<summary>
Static class with factory method to create LZ4 encoders.
</summary>
</member>
<member name="M:K4os.Compression.LZ4.Encoders.LZ4Encoder.Create(System.Boolean,K4os.Compression.LZ4.LZ4Level,System.Int32,System.Int32)">
<summary>Creates appropriate decoder for given parameters.</summary>
<param name="chaining">Dependent blocks.</param>
<param name="level">Compression level.</param>
<param name="blockSize">Block size.</param>
<param name="extraBlocks">Number of extra blocks.</param>
<returns>LZ4 encoder.</returns>
</member>
<member name="T:K4os.Compression.LZ4.Encoders.LZ4EncoderBase">
<summary>
Base class for LZ4 encoders. Provides basic functionality shared by
<see cref="T:K4os.Compression.LZ4.Encoders.LZ4BlockEncoder"/>, <see cref="T:K4os.Compression.LZ4.Encoders.LZ4FastChainEncoder"/>,
and <see cref="T:K4os.Compression.LZ4.Encoders.LZ4HighChainEncoder"/> encoders. Do not used directly.
</summary>
</member>
<member name="M:K4os.Compression.LZ4.Encoders.LZ4EncoderBase.#ctor(System.Boolean,System.Int32,System.Int32)">
<summary>Creates new instance of encoder.</summary>
<param name="chaining">Needs to be <c>true</c> if using dependent blocks.</param>
<param name="blockSize">Block size.</param>
<param name="extraBlocks">Number of extra blocks.</param>
</member>
<member name="P:K4os.Compression.LZ4.Encoders.LZ4EncoderBase.BlockSize">
<inheritdoc />
</member>
<member name="P:K4os.Compression.LZ4.Encoders.LZ4EncoderBase.BytesReady">
<inheritdoc />
</member>
<member name="M:K4os.Compression.LZ4.Encoders.LZ4EncoderBase.Topup(System.Byte*,System.Int32)">
<inheritdoc />
</member>
<member name="M:K4os.Compression.LZ4.Encoders.LZ4EncoderBase.Encode(System.Byte*,System.Int32,System.Boolean)">
<inheritdoc />
</member>
<member name="M:K4os.Compression.LZ4.Encoders.LZ4EncoderBase.EncodeBlock(System.Byte*,System.Int32,System.Byte*,System.Int32)">
<summary>Encodes single block using appropriate algorithm.</summary>
<param name="source">Source buffer.</param>
<param name="sourceLength">Source buffer length.</param>
<param name="target">Target buffer.</param>
<param name="targetLength">Target buffer length.</param>
<returns>Number of bytes actually written to target buffer.</returns>
</member>
<member name="M:K4os.Compression.LZ4.Encoders.LZ4EncoderBase.CopyDict(System.Byte*,System.Int32)">
<summary>Copies current dictionary.</summary>
<param name="target">Target buffer.</param>
<param name="dictionaryLength">Dictionary length.</param>
<returns>Dictionary length.</returns>
</member>
<member name="M:K4os.Compression.LZ4.Encoders.LZ4EncoderBase.ReleaseUnmanaged">
<inheritdoc />
</member>
<member name="T:K4os.Compression.LZ4.Encoders.LZ4EncoderExtensions">
<summary>
Functionality of encoders added on top of fixed interface.
</summary>
</member>
<member name="M:K4os.Compression.LZ4.Encoders.LZ4EncoderExtensions.Topup(K4os.Compression.LZ4.Encoders.ILZ4Encoder,System.Byte*@,System.Int32)">
<summary>Tops encoder up with some data.</summary>
<param name="encoder">Encoder.</param>
<param name="source">Buffer pointer, will be shifted after operation by the number of
bytes actually loaded.</param>
<param name="length">Length of buffer.</param>
<returns><c>true</c> if buffer was topped up, <c>false</c> if no bytes were loaded.</returns>
</member>
<member name="M:K4os.Compression.LZ4.Encoders.LZ4EncoderExtensions.Topup(K4os.Compression.LZ4.Encoders.ILZ4Encoder,System.Byte[],System.Int32,System.Int32)">
<summary>Tops encoder up with some data.</summary>
<param name="encoder">Encoder.</param>
<param name="source">Buffer.</param>
<param name="offset">Buffer offset.</param>
<param name="length">Length of buffer.</param>
<returns>Number of bytes actually loaded.</returns>
</member>
<member name="M:K4os.Compression.LZ4.Encoders.LZ4EncoderExtensions.Topup(K4os.Compression.LZ4.Encoders.ILZ4Encoder,System.Byte[],System.Int32@,System.Int32)">
<summary>Tops encoder up with some data.</summary>
<param name="encoder">Encoder.</param>
<param name="source">Buffer.</param>
<param name="offset">Buffer offset, will be increased after operation by the number
of bytes actually loaded.</param>
<param name="length">Length of buffer.</param>
<returns><c>true</c> if buffer was topped up, <c>false</c> if no bytes were loaded.</returns>
</member>
<member name="M:K4os.Compression.LZ4.Encoders.LZ4EncoderExtensions.Encode(K4os.Compression.LZ4.Encoders.ILZ4Encoder,System.Byte[],System.Int32,System.Int32,System.Boolean)">
<summary>Encodes all bytes currently stored in encoder into target buffer.</summary>
<param name="encoder">Encoder.</param>
<param name="target">Target buffer.</param>
<param name="offset">Offset in target buffer.</param>
<param name="length">Length of target buffer.</param>
<param name="allowCopy">if <c>true</c> copying bytes is allowed.</param>
<returns>Number of bytes encoder. If bytes were copied than this value is negative.</returns>
</member>
<member name="M:K4os.Compression.LZ4.Encoders.LZ4EncoderExtensions.Encode(K4os.Compression.LZ4.Encoders.ILZ4Encoder,System.Byte[],System.Int32@,System.Int32,System.Boolean)">
<summary>Encodes all bytes currently stored in encoder into target buffer.</summary>
<param name="encoder">Encoder.</param>
<param name="target">Target buffer.</param>
<param name="offset">Offset in target buffer. Will be updated after operation.</param>
<param name="length">Length of target buffer.</param>
<param name="allowCopy">if <c>true</c> copying bytes is allowed.</param>
<returns>Result of this action. Bytes can be Copied (<see cref="F:K4os.Compression.LZ4.Encoders.EncoderAction.Copied"/>),
Encoded (<see cref="F:K4os.Compression.LZ4.Encoders.EncoderAction.Encoded"/>) or nothing could have
happened (<see cref="F:K4os.Compression.LZ4.Encoders.EncoderAction.None"/>).</returns>
</member>
<member name="M:K4os.Compression.LZ4.Encoders.LZ4EncoderExtensions.Encode(K4os.Compression.LZ4.Encoders.ILZ4Encoder,System.Byte*@,System.Int32,System.Boolean)">
<summary>Encodes all bytes currently stored in encoder into target buffer.</summary>
<param name="encoder">Encoder.</param>
<param name="target">Target buffer. Will be updated after operation.</param>
<param name="length">Length of buffer.</param>
<param name="allowCopy">if <c>true</c> copying bytes is allowed.</param>
<returns>Result of this action. Bytes can be Copied (<see cref="F:K4os.Compression.LZ4.Encoders.EncoderAction.Copied"/>),
Encoded (<see cref="F:K4os.Compression.LZ4.Encoders.EncoderAction.Encoded"/>) or nothing could have
happened (<see cref="F:K4os.Compression.LZ4.Encoders.EncoderAction.None"/>).</returns>
</member>
<member name="M:K4os.Compression.LZ4.Encoders.LZ4EncoderExtensions.TopupAndEncode(K4os.Compression.LZ4.Encoders.ILZ4Encoder,System.Byte*,System.Int32,System.Byte*,System.Int32,System.Boolean,System.Boolean,System.Int32@,System.Int32@)">
<summary>Tops encoder and encodes content.</summary>
<param name="encoder">Encoder.</param>
<param name="source">Source buffer (used to top up from).</param>
<param name="sourceLength">Source buffer length.</param>
<param name="target">Target buffer (used to encode into)</param>
<param name="targetLength">Target buffer length.</param>
<param name="forceEncode">Forces encoding even if encoder is not full.</param>
<param name="allowCopy">Allows to copy bytes if compression was not possible.</param>
<param name="loaded">Number of bytes loaded (topped up)</param>
<param name="encoded">Number if bytes encoded or copied.
Value is 0 if no encoding was done.</param>
<returns>Action performed.</returns>
</member>
<member name="M:K4os.Compression.LZ4.Encoders.LZ4EncoderExtensions.TopupAndEncode(K4os.Compression.LZ4.Encoders.ILZ4Encoder,System.Byte[],System.Int32,System.Int32,System.Byte[],System.Int32,System.Int32,System.Boolean,System.Boolean,System.Int32@,System.Int32@)">
<summary>Tops encoder and encodes content.</summary>
<param name="encoder">Encoder.</param>
<param name="source">Source buffer (used to top up from).</param>
<param name="sourceOffset">Offset within source buffer.</param>
<param name="sourceLength">Source buffer length.</param>
<param name="target">Target buffer (used to encode into)</param>
<param name="targetOffset">Offset within target buffer.</param>
<param name="targetLength">Target buffer length.</param>
<param name="forceEncode">Forces encoding even if encoder is not full.</param>
<param name="allowCopy">Allows to copy bytes if compression was not possible.</param>
<param name="loaded">Number of bytes loaded (topped up)</param>
<param name="encoded">Number if bytes encoded or copied.
Value is 0 if no encoding was done.</param>
<returns>Action performed.</returns>
</member>
<member name="M:K4os.Compression.LZ4.Encoders.LZ4EncoderExtensions.TopupAndEncode(K4os.Compression.LZ4.Encoders.ILZ4Encoder,System.ReadOnlySpan{System.Byte},System.Span{System.Byte},System.Boolean,System.Boolean,System.Int32@,System.Int32@)">
<summary>Tops encoder and encodes content.</summary>
<param name="encoder">Encoder.</param>
<param name="source">Source buffer (used to top up from).</param>
<param name="target">Target buffer (used to encode into)</param>
<param name="forceEncode">Forces encoding even if encoder is not full.</param>
<param name="allowCopy">Allows to copy bytes if compression was not possible.</param>
<param name="loaded">Number of bytes loaded (topped up)</param>
<param name="encoded">Number if bytes encoded or copied.
Value is 0 if no encoding was done.</param>
<returns>Action performed.</returns>
</member>
<member name="M:K4os.Compression.LZ4.Encoders.LZ4EncoderExtensions.FlushAndEncode(K4os.Compression.LZ4.Encoders.ILZ4Encoder,System.Byte*,System.Int32,System.Boolean,System.Int32@)">
<summary>Encoded remaining bytes in encoder.</summary>
<param name="encoder">Encoder.</param>
<param name="target">Target buffer.</param>
<param name="targetLength">Target buffer length.</param>
<param name="allowCopy">Allows to copy bytes if compression was not possible.</param>
<param name="encoded">Number if bytes encoded or copied.
Value is 0 if no encoding was done.</param>
<returns>Action performed.</returns>
</member>
<member name="M:K4os.Compression.LZ4.Encoders.LZ4EncoderExtensions.FlushAndEncode(K4os.Compression.LZ4.Encoders.ILZ4Encoder,System.Byte[],System.Int32,System.Int32,System.Boolean,System.Int32@)">
<summary>Encoded remaining bytes in encoder.</summary>
<param name="encoder">Encoder.</param>
<param name="target">Target buffer.</param>
<param name="targetOffset">Offset within target buffer.</param>
<param name="targetLength">Target buffer length.</param>
<param name="allowCopy">Allows to copy bytes if compression was not possible.</param>
<param name="encoded">Number if bytes encoded or copied.
Value is 0 if no encoding was done.</param>
<returns>Action performed.</returns>
</member>
<member name="M:K4os.Compression.LZ4.Encoders.LZ4EncoderExtensions.FlushAndEncode(K4os.Compression.LZ4.Encoders.ILZ4Encoder,System.Span{System.Byte},System.Boolean,System.Int32@)">
<summary>Encoded remaining bytes in encoder.</summary>
<param name="encoder">Encoder.</param>
<param name="target">Target buffer.</param>
<param name="allowCopy">Allows to copy bytes if compression was not possible.</param>
<param name="encoded">Number if bytes encoded or copied.
Value is 0 if no encoding was done.</param>
<returns>Action performed.</returns>
</member>
<member name="M:K4os.Compression.LZ4.Encoders.LZ4EncoderExtensions.Drain(K4os.Compression.LZ4.Encoders.ILZ4Decoder,System.Byte[],System.Int32,System.Int32,System.Int32)">
<summary>Drains decoder by reading all bytes which are ready.</summary>
<param name="decoder">Decoder.</param>
<param name="target">Target buffer.</param>
<param name="targetOffset">Offset within target buffer.</param>
<param name="offset">Offset in decoder relatively to decoder's head.
Please note, it should be negative value.</param>
<param name="length">Number of bytes.</param>
</member>
<member name="M:K4os.Compression.LZ4.Encoders.LZ4EncoderExtensions.Drain(K4os.Compression.LZ4.Encoders.ILZ4Decoder,System.Span{System.Byte},System.Int32,System.Int32)">
<summary>Drains decoder by reading all bytes which are ready.</summary>
<param name="decoder">Decoder.</param>
<param name="target">Target buffer.</param>
<param name="offset">Offset in decoder relatively to decoder's head.
Please note, it should be negative value.</param>
<param name="length">Number of bytes.</param>
</member>
<member name="M:K4os.Compression.LZ4.Encoders.LZ4EncoderExtensions.DecodeAndDrain(K4os.Compression.LZ4.Encoders.ILZ4Decoder,System.Byte*,System.Int32,System.Byte*,System.Int32,System.Int32@)">
<summary>Decodes data and immediately drains it into target buffer.</summary>
<param name="decoder">Decoder.</param>
<param name="source">Source buffer (with compressed data, to be decoded).</param>
<param name="sourceLength">Source buffer length.</param>
<param name="target">Target buffer (to drained into).</param>
<param name="targetLength">Target buffer length.</param>
<param name="decoded">Number of bytes actually decoded.</param>
<returns><c>true</c> decoder was drained, <c>false</c> otherwise.</returns>
</member>
<member name="M:K4os.Compression.LZ4.Encoders.LZ4EncoderExtensions.DecodeAndDrain(K4os.Compression.LZ4.Encoders.ILZ4Decoder,System.Byte[],System.Int32,System.Int32,System.Byte[],System.Int32,System.Int32,System.Int32@)">
<summary>Decodes data and immediately drains it into target buffer.</summary>
<param name="decoder">Decoder.</param>
<param name="source">Source buffer (with compressed data, to be decoded).</param>
<param name="sourceOffset">Offset within source buffer.</param>
<param name="sourceLength">Source buffer length.</param>
<param name="target">Target buffer (to drained into).</param>
<param name="targetOffset">Offset within target buffer.</param>
<param name="targetLength">Target buffer length.</param>
<param name="decoded">Number of bytes actually decoded.</param>
<returns><c>true</c> decoder was drained, <c>false</c> otherwise.</returns>
</member>
<member name="M:K4os.Compression.LZ4.Encoders.LZ4EncoderExtensions.DecodeAndDrain(K4os.Compression.LZ4.Encoders.ILZ4Decoder,System.ReadOnlySpan{System.Byte},System.Span{System.Byte},System.Int32@)">
<summary>Decodes data and immediately drains it into target buffer.</summary>
<param name="decoder">Decoder.</param>
<param name="source">Source buffer (with compressed data, to be decoded).</param>
<param name="target">Target buffer (to drained into).</param>
<param name="decoded">Number of bytes actually decoded.</param>
<returns><c>true</c> decoder was drained, <c>false</c> otherwise.</returns>
</member>
<member name="M:K4os.Compression.LZ4.Encoders.LZ4EncoderExtensions.Inject(K4os.Compression.LZ4.Encoders.ILZ4Decoder,System.Byte[],System.Int32,System.Int32)">
<summary>
Inject already decompressed block and caches it in decoder.
Used with uncompressed-yet-chained blocks and pre-made dictionaries.
See <see cref="M:K4os.Compression.LZ4.Encoders.ILZ4Decoder.Inject(System.Byte*,System.Int32)"/>.
</summary>
<param name="decoder">Decoder.</param>
<param name="buffer">Uncompressed block.</param>
<param name="offset">Offset in uncompressed block.</param>
<param name="length">Length of uncompressed block.</param>
<returns>Number of decoded bytes.</returns>
</member>
<member name="M:K4os.Compression.LZ4.Encoders.LZ4EncoderExtensions.Decode(K4os.Compression.LZ4.Encoders.ILZ4Decoder,System.Byte[],System.Int32,System.Int32,System.Int32)">
<summary>
Decodes previously compressed block and caches decompressed block in decoder.
Returns number of bytes decoded.
See <see cref="M:K4os.Compression.LZ4.Encoders.ILZ4Decoder.Decode(System.Byte*,System.Int32,System.Int32)"/>.
</summary>
<param name="decoder">Decoder.</param>
<param name="buffer">Compressed block.</param>
<param name="offset">Offset in compressed block.</param>
<param name="length">Length of compressed block.</param>
<param name="blockSize">Size of the block. Value <c>0</c> indicates default block size.</param>
<returns>Number of decoded bytes.</returns>
</member>
<member name="T:K4os.Compression.LZ4.Encoders.LZ4FastChainEncoder">
<summary>
LZ4 encoder using dependent blocks with fast compression.
</summary>
</member>
<member name="M:K4os.Compression.LZ4.Encoders.LZ4FastChainEncoder.#ctor(System.Int32,System.Int32)">
<summary>Creates new instance of <see cref="T:K4os.Compression.LZ4.Encoders.LZ4FastChainEncoder"/></summary>
<param name="blockSize">Block size.</param>
<param name="extraBlocks">Number of extra blocks.</param>
</member>
<member name="M:K4os.Compression.LZ4.Encoders.LZ4FastChainEncoder.ReleaseUnmanaged">
<inheritdoc />
</member>
<member name="M:K4os.Compression.LZ4.Encoders.LZ4FastChainEncoder.EncodeBlock(System.Byte*,System.Int32,System.Byte*,System.Int32)">
<inheritdoc />
</member>
<member name="M:K4os.Compression.LZ4.Encoders.LZ4FastChainEncoder.CopyDict(System.Byte*,System.Int32)">
<inheritdoc />
</member>
<member name="T:K4os.Compression.LZ4.Encoders.LZ4HighChainEncoder">
<summary>
LZ4 encoder using dependent blocks with high compression.
</summary>
</member>
<member name="M:K4os.Compression.LZ4.Encoders.LZ4HighChainEncoder.#ctor(K4os.Compression.LZ4.LZ4Level,System.Int32,System.Int32)">
<summary>Creates new instance of <see cref="T:K4os.Compression.LZ4.Encoders.LZ4HighChainEncoder"/></summary>
<param name="level">Compression level.</param>
<param name="blockSize">Block size.</param>
<param name="extraBlocks">Number of extra blocks.</param>
</member>
<member name="M:K4os.Compression.LZ4.Encoders.LZ4HighChainEncoder.ReleaseUnmanaged">
<inheritdoc />
</member>
<member name="M:K4os.Compression.LZ4.Encoders.LZ4HighChainEncoder.EncodeBlock(System.Byte*,System.Int32,System.Byte*,System.Int32)">
<inheritdoc />
</member>
<member name="M:K4os.Compression.LZ4.Encoders.LZ4HighChainEncoder.CopyDict(System.Byte*,System.Int32)">
<inheritdoc />
</member>
<member name="T:K4os.Compression.LZ4.Engine.Algorithm">
<summary>Algorithm selection.</summary>
</member>
<member name="F:K4os.Compression.LZ4.Engine.Algorithm.X32">
<summary>Intel and ARMv7 version of 32 bit algorithm.</summary>
</member>
<member name="F:K4os.Compression.LZ4.Engine.Algorithm.X64">
<summary>Intel version of 64 bit algorithm.</summary>
</member>
<member name="P:K4os.Compression.LZ4.Engine.LL.Algorithm">
<summary>Checks what algorithm should be used (32 vs 64 bit).</summary>
</member>
<member name="T:K4os.Compression.LZ4.Engine.Pubternal">
<summary>
Existence of this class is an admission of failure.
I failed to export internals to test assemblies.
Using InternalsVisibleTo work, of course, but with signing (which was requested
in https://github.com/MiloszKrajewski/K4os.Compression.LZ4/issues/9) it is
absolute PITA. So no, I'm not using InternalsVisibleTo I will just expose this
little class with some "redirects" to real internals.
</summary>
</member>
<member name="T:K4os.Compression.LZ4.Engine.Pubternal.FastContext">
<summary>Pubternal wrapper for LZ4_stream_t.</summary>
</member>
<member name="M:K4os.Compression.LZ4.Engine.Pubternal.FastContext.#ctor">
<summary>Creates new instance of wrapper for LZ4_stream_t.</summary>
</member>
<member name="M:K4os.Compression.LZ4.Engine.Pubternal.FastContext.ReleaseUnmanaged">
<inheritdoc/>
</member>
<member name="M:K4os.Compression.LZ4.Engine.Pubternal.CompressFast(K4os.Compression.LZ4.Engine.Pubternal.FastContext,System.Byte*,System.Byte*,System.Int32,System.Int32,System.Int32)">
<summary>
Compresses chunk of data using LZ4_compress_fast_continue.
</summary>
<param name="context">Wrapper for LZ4_stream_t</param>
<param name="source">Source block address.</param>
<param name="target">Target block address.</param>
<param name="sourceLength">Source block length.</param>
<param name="targetLength">Target block length.</param>
<param name="acceleration">Acceleration.</param>
<returns>Number of bytes actually written to target.</returns>
</member>
<member name="T:K4os.Compression.LZ4.Internal.Mem">
<summary>Utility class with memory related functions.</summary>
</member>
<member name="F:K4os.Compression.LZ4.Internal.Mem.K1">
<summary>1 KiB</summary>
</member>
<member name="F:K4os.Compression.LZ4.Internal.Mem.K2">
<summary>2 KiB</summary>
</member>
<member name="F:K4os.Compression.LZ4.Internal.Mem.K4">
<summary>4 KiB</summary>
</member>
<member name="F:K4os.Compression.LZ4.Internal.Mem.K8">
<summary>8 KiB</summary>
</member>
<member name="F:K4os.Compression.LZ4.Internal.Mem.K16">
<summary>16 KiB</summary>
</member>
<member name="F:K4os.Compression.LZ4.Internal.Mem.K32">
<summary>32 KiB</summary>
</member>
<member name="F:K4os.Compression.LZ4.Internal.Mem.K64">
<summary>64 KiB</summary>
</member>
<member name="F:K4os.Compression.LZ4.Internal.Mem.K128">
<summary>128 KiB</summary>
</member>
<member name="F:K4os.Compression.LZ4.Internal.Mem.K256">
<summary>256 KiB</summary>
</member>
<member name="F:K4os.Compression.LZ4.Internal.Mem.K512">
<summary>512 KiB</summary>
</member>
<member name="F:K4os.Compression.LZ4.Internal.Mem.M1">
<summary>1 MiB</summary>
</member>
<member name="F:K4os.Compression.LZ4.Internal.Mem.M4">
<summary>4 MiB</summary>
</member>
<member name="F:K4os.Compression.LZ4.Internal.Mem.Empty">
<summary>Empty byte array.</summary>
</member>
<member name="P:K4os.Compression.LZ4.Internal.Mem.System32">
<summary>Checks if process is ran in 32-bit mode.</summary>
</member>
<member name="M:K4os.Compression.LZ4.Internal.Mem.RoundUp(System.Int32,System.Int32)">
<summary>Rounds integer value up to nearest multiple of step.</summary>
<param name="value">A value.</param>
<param name="step">A step.</param>
<returns>Value rounded up.</returns>
</member>
<member name="M:K4os.Compression.LZ4.Internal.Mem.CpBlk(System.Void*,System.Void*,System.UInt32)">
<summary>
Copies memory block for <paramref name="source"/> to <paramref name="target"/>.
</summary>
<param name="target">The target block address.</param>
<param name="source">The source block address.</param>
<param name="length">Length in bytes.</param>
</member>
<member name="M:K4os.Compression.LZ4.Internal.Mem.ZBlk(System.Void*,System.Byte,System.UInt32)">
<summary>
Fills <paramref name="target"/> memory block with predefined <paramref name="value"/>.
</summary>
<param name="target">The target block address.</param>
<param name="value">Value to be used.</param>
<param name="length">Length in bytes.</param>
</member>
<member name="M:K4os.Compression.LZ4.Internal.Mem.Copy(System.Byte*,System.Byte*,System.Int32)">
<summary>
Copies memory block for <paramref name="source"/> to <paramref name="target"/>.
</summary>
<param name="target">The target block address.</param>
<param name="source">The source block address.</param>
<param name="length">Length in bytes.</param>
</member>
<member name="M:K4os.Compression.LZ4.Internal.Mem.Move(System.Byte*,System.Byte*,System.Int32)">
<summary>
Copies memory block for <paramref name="source"/> to <paramref name="target"/>.
It handle "move" semantic properly handling overlapping blocks properly.
</summary>
<param name="target">The target block address.</param>
<param name="source">The source block address.</param>
<param name="length">Length in bytes.</param>
</member>
<member name="M:K4os.Compression.LZ4.Internal.Mem.Alloc(System.Int32)">
<summary>Allocated block of memory. It is NOT initialized with zeroes.</summary>
<param name="size">Size in bytes.</param>
<returns>Pointer to allocated block.</returns>
</member>
<member name="M:K4os.Compression.LZ4.Internal.Mem.Zero(System.Byte*,System.Int32)">
<summary>Fill block of memory with zeroes.</summary>
<param name="target">Address.</param>
<param name="length">Length.</param>
<returns>Original pointer.</returns>
</member>
<member name="M:K4os.Compression.LZ4.Internal.Mem.Fill(System.Byte*,System.Byte,System.Int32)">
<summary>Fills memory block with repeating pattern of a single byte.</summary>
<param name="target">Address.</param>
<param name="value">A pattern.</param>
<param name="length">Length.</param>
<returns>Original pointer.</returns>
</member>
<member name="M:K4os.Compression.LZ4.Internal.Mem.AllocZero(System.Int32)">
<summary>Allocates block of memory and fills it with zeroes.</summary>
<param name="size">Size in bytes.</param>
<returns>Pointer to allocated block.</returns>
</member>
<member name="M:K4os.Compression.LZ4.Internal.Mem.Free(System.Void*)">
<summary>
Free memory allocated previously with <see cref="M:K4os.Compression.LZ4.Internal.Mem.Alloc(System.Int32)"/>.
</summary>
<param name="ptr"></param>
</member>
<member name="M:K4os.Compression.LZ4.Internal.Mem.CloneArray(System.Int32[])">
<summary>Clones managed array to unmanaged one. Allows quicker yet less safe unchecked access.</summary>
<param name="array">Input array.</param>
<returns>Cloned array.</returns>
</member>
<member name="M:K4os.Compression.LZ4.Internal.Mem.CloneArray(System.UInt32[])">
<summary>Clones managed array to unmanaged one. Allows quicker yet less safe unchecked access.</summary>
<param name="array">Input array.</param>
<returns>Cloned array.</returns>
</member>
<member name="M:K4os.Compression.LZ4.Internal.Mem.Peek1(System.Void*)">
<summary>Reads exactly 1 byte from given address.</summary>
<param name="p">Address.</param>
<returns>Byte at given address.</returns>
</member>
<member name="M:K4os.Compression.LZ4.Internal.Mem.Poke1(System.Void*,System.Byte)">
<summary>Writes exactly 1 byte to given address.</summary>
<param name="p">Address.</param>
<param name="v">Value.</param>
</member>
<member name="M:K4os.Compression.LZ4.Internal.Mem.Peek2(System.Void*)">
<summary>Reads exactly 2 bytes from given address.</summary>
<param name="p">Address.</param>
<returns>2 bytes at given address.</returns>
</member>
<member name="M:K4os.Compression.LZ4.Internal.Mem.Poke2(System.Void*,System.UInt16)">
<summary>Writes exactly 2 bytes to given address.</summary>
<param name="p">Address.</param>
<param name="v">Value.</param>
</member>
<member name="M:K4os.Compression.LZ4.Internal.Mem.Peek4(System.Void*)">
<summary>Reads exactly 4 bytes from given address.</summary>
<param name="p">Address.</param>
<returns>4 bytes at given address.</returns>
</member>
<member name="M:K4os.Compression.LZ4.Internal.Mem.Poke4(System.Void*,System.UInt32)">
<summary>Writes exactly 4 bytes to given address.</summary>
<param name="p">Address.</param>
<param name="v">Value.</param>
</member>
<member name="M:K4os.Compression.LZ4.Internal.Mem.Peek8(System.Void*)">
<summary>Reads exactly 8 bytes from given address.</summary>
<param name="p">Address.</param>
<returns>8 bytes at given address.</returns>
</member>
<member name="M:K4os.Compression.LZ4.Internal.Mem.Poke8(System.Void*,System.UInt64)">
<summary>Writes exactly 8 bytes to given address.</summary>
<param name="p">Address.</param>
<param name="v">Value.</param>
</member>
<member name="M:K4os.Compression.LZ4.Internal.Mem.Copy1(System.Byte*,System.Byte*)">
<summary>Copies exactly 1 byte from source to target.</summary>
<param name="target">Target address.</param>
<param name="source">Source address.</param>
</member>
<member name="M:K4os.Compression.LZ4.Internal.Mem.Copy2(System.Byte*,System.Byte*)">
<summary>Copies exactly 2 bytes from source to target.</summary>
<param name="target">Target address.</param>
<param name="source">Source address.</param>
</member>
<member name="M:K4os.Compression.LZ4.Internal.Mem.Copy4(System.Byte*,System.Byte*)">
<summary>Copies exactly 4 bytes from source to target.</summary>
<param name="target">Target address.</param>
<param name="source">Source address.</param>
</member>
<member name="M:K4os.Compression.LZ4.Internal.Mem.Copy8(System.Byte*,System.Byte*)">
<summary>Copies exactly 8 bytes from source to target.</summary>
<param name="target">Target address.</param>
<param name="source">Source address.</param>
</member>
<member name="T:K4os.Compression.LZ4.Internal.UnmanagedResources">
<summary>
Skeleton for class with unmanaged resources.
Implements <see cref="T:System.IDisposable"/> but also handles proper release in
case <see cref="M:K4os.Compression.LZ4.Internal.UnmanagedResources.Dispose"/> was not called.
</summary>
</member>
<member name="P:K4os.Compression.LZ4.Internal.UnmanagedResources.IsDisposed">
<summary>Determines if object was already disposed.</summary>
</member>
<member name="M:K4os.Compression.LZ4.Internal.UnmanagedResources.ThrowIfDisposed">
<summary>Throws exception is object has been disposed already. Convenience method.</summary>
<exception cref="T:System.ObjectDisposedException">Thrown if object is already disposed.</exception>
</member>
<member name="M:K4os.Compression.LZ4.Internal.UnmanagedResources.ReleaseUnmanaged">
<summary>Method releasing unmanaged resources.</summary>
</member>
<member name="M:K4os.Compression.LZ4.Internal.UnmanagedResources.ReleaseManaged">
<summary>Method releasing managed resources.</summary>
</member>
<member name="M:K4os.Compression.LZ4.Internal.UnmanagedResources.Dispose(System.Boolean)">
<summary>
Disposed resources.
</summary>
<param name="disposing"><c>true</c> if dispose was explicitly called,
<c>false</c> if called from GC.</param>
</member>
<member name="M:K4os.Compression.LZ4.Internal.UnmanagedResources.Dispose">
<inheritdoc />
</member>
<member name="M:K4os.Compression.LZ4.Internal.UnmanagedResources.Finalize">
<summary>Destructor.</summary>
</member>
<member name="T:K4os.Compression.LZ4.Internal.Mem32">
<summary>Unsafe memory operations.</summary>
</member>
<member name="M:K4os.Compression.LZ4.Internal.Mem32.PeekW(System.Void*)">
<summary>Reads 4 bytes from given address.</summary>
<param name="p">Address.</param>
<returns>4 bytes at given address.</returns>
</member>
<member name="M:K4os.Compression.LZ4.Internal.Mem32.PokeW(System.Void*,System.UInt32)">
<summary>Writes 4 or 8 bytes to given address.</summary>
<param name="p">Address.</param>
<param name="v">Value.</param>
</member>
<member name="M:K4os.Compression.LZ4.Internal.Mem32.Copy16(System.Byte*,System.Byte*)">
<summary>Copies exactly 16 bytes from source to target.</summary>
<param name="target">Target address.</param>
<param name="source">Source address.</param>
</member>
<member name="M:K4os.Compression.LZ4.Internal.Mem32.Copy18(System.Byte*,System.Byte*)">
<summary>Copies exactly 18 bytes from source to target.</summary>
<param name="target">Target address.</param>
<param name="source">Source address.</param>
</member>
<member name="M:K4os.Compression.LZ4.Internal.Mem32.WildCopy8(System.Byte*,System.Byte*,System.Void*)">
<summary>
Copies memory block for <paramref name="source"/> to <paramref name="target"/>
up to (around) <paramref name="limit"/>.
It does not handle overlapping blocks and may copy up to 8 bytes more than expected.
</summary>
<param name="target">The target block address.</param>
<param name="source">The source block address.</param>
<param name="limit">The limit (in target block).</param>
</member>
<member name="M:K4os.Compression.LZ4.Internal.Mem32.WildCopy32(System.Byte*,System.Byte*,System.Void*)">
<summary>
Copies memory block for <paramref name="source"/> to <paramref name="target"/>
up to (around) <paramref name="limit"/>.
It does not handle overlapping blocks and may copy up to 32 bytes more than expected.
This version copies two times 16 bytes (instead of one time 32 bytes)
because it must be compatible with offsets >= 16.
</summary>
<param name="target">The target block address.</param>
<param name="source">The source block address.</param>
<param name="limit">The limit (in target block).</param>
</member>
<member name="T:K4os.Compression.LZ4.Internal.Mem64">
<summary>Unsafe memory operations.</summary>
</member>
<member name="M:K4os.Compression.LZ4.Internal.Mem64.Peek2(System.Void*)">
<summary>Reads exactly 2 bytes from given address.</summary>
<param name="p">Address.</param>
<returns>2 bytes at given address.</returns>
</member>
<member name="M:K4os.Compression.LZ4.Internal.Mem64.Poke2(System.Void*,System.UInt16)">
<summary>Writes exactly 2 bytes to given address.</summary>
<param name="p">Address.</param>
<param name="v">Value.</param>
</member>
<member name="M:K4os.Compression.LZ4.Internal.Mem64.Peek4(System.Void*)">
<summary>Reads exactly 4 bytes from given address.</summary>
<param name="p">Address.</param>
<returns>4 bytes at given address.</returns>
</member>
<member name="M:K4os.Compression.LZ4.Internal.Mem64.Poke4(System.Void*,System.UInt32)">
<summary>Writes exactly 4 bytes to given address.</summary>
<param name="p">Address.</param>
<param name="v">Value.</param>
</member>
<member name="M:K4os.Compression.LZ4.Internal.Mem64.Copy1(System.Byte*,System.Byte*)">
<summary>Copies exactly 1 byte from source to target.</summary>
<param name="target">Target address.</param>
<param name="source">Source address.</param>
</member>
<member name="M:K4os.Compression.LZ4.Internal.Mem64.Copy2(System.Byte*,System.Byte*)">
<summary>Copies exactly 2 bytes from source to target.</summary>
<param name="target">Target address.</param>
<param name="source">Source address.</param>
</member>
<member name="M:K4os.Compression.LZ4.Internal.Mem64.Copy4(System.Byte*,System.Byte*)">
<summary>Copies exactly 4 bytes from source to target.</summary>
<param name="target">Target address.</param>
<param name="source">Source address.</param>
</member>
<member name="M:K4os.Compression.LZ4.Internal.Mem64.Peek8(System.Void*)">
<summary>Reads exactly 8 bytes from given address.</summary>
<param name="p">Address.</param>
<returns>8 bytes at given address.</returns>
</member>
<member name="M:K4os.Compression.LZ4.Internal.Mem64.Poke8(System.Void*,System.UInt64)">
<summary>Writes exactly 8 bytes to given address.</summary>
<param name="p">Address.</param>
<param name="v">Value.</param>
</member>
<member name="M:K4os.Compression.LZ4.Internal.Mem64.Copy8(System.Byte*,System.Byte*)">
<summary>Copies exactly 8 bytes from source to target.</summary>
<param name="target">Target address.</param>
<param name="source">Source address.</param>
</member>
<member name="M:K4os.Compression.LZ4.Internal.Mem64.PeekW(System.Void*)">
<summary>Reads 8 bytes from given address.</summary>
<param name="p">Address.</param>
<returns>8 bytes at given address.</returns>
</member>
<member name="M:K4os.Compression.LZ4.Internal.Mem64.PokeW(System.Void*,System.UInt64)">
<summary>Writes 8 bytes to given address.</summary>
<param name="p">Address.</param>
<param name="v">Value.</param>
</member>
<member name="M:K4os.Compression.LZ4.Internal.Mem64.Copy16(System.Byte*,System.Byte*)">
<summary>Copies exactly 16 bytes from source to target.</summary>
<param name="target">Target address.</param>
<param name="source">Source address.</param>
</member>
<member name="M:K4os.Compression.LZ4.Internal.Mem64.Copy18(System.Byte*,System.Byte*)">
<summary>Copies exactly 18 bytes from source to target.</summary>
<param name="target">Target address.</param>
<param name="source">Source address.</param>
</member>
<member name="M:K4os.Compression.LZ4.Internal.Mem64.WildCopy8(System.Byte*,System.Byte*,System.Void*)">
<summary>
Copies memory block for <paramref name="source"/> to <paramref name="target"/>
up to (around) <paramref name="limit"/>.
It does not handle overlapping blocks and may copy up to 8 bytes more than expected.
</summary>
<param name="target">The target block address.</param>
<param name="source">The source block address.</param>
<param name="limit">The limit (in target block).</param>
</member>
<member name="M:K4os.Compression.LZ4.Internal.Mem64.WildCopy32(System.Byte*,System.Byte*,System.Void*)">
<summary>
Copies memory block for <paramref name="source"/> to <paramref name="target"/>
up to (around) <paramref name="limit"/>.
It does not handle overlapping blocks and may copy up to 32 bytes more than expected.
This version copies two times 16 bytes (instead of one time 32 bytes)
because it must be compatible with offsets >= 16.
</summary>
<param name="target">The target block address.</param>
<param name="source">The source block address.</param>
<param name="limit">The limit (in target block).</param>
</member>
<member name="T:K4os.Compression.LZ4.LZ4Codec">
<summary>
Static class exposing LZ4 block compression methods.
</summary>
</member>
<member name="F:K4os.Compression.LZ4.LZ4Codec.Version">
<summary>Version of LZ4 implementation.</summary>
</member>
<member name="P:K4os.Compression.LZ4.LZ4Codec.Enforce32">
<summary>
Enforces 32-bit compression/decompression algorithm even on 64-bit systems.
Please note, this property should not be used on regular basis, it just allows
to workaround some problems on platforms which do not support 64-bit the same was
as Intel (for example: unaligned read/writes).
</summary>
</member>
<member name="M:K4os.Compression.LZ4.LZ4Codec.MaximumOutputSize(System.Int32)">
<summary>Maximum size after compression.</summary>
<param name="length">Length of input buffer.</param>
<returns>Maximum length after compression.</returns>
</member>
<member name="M:K4os.Compression.LZ4.LZ4Codec.Encode(System.Byte*,System.Int32,System.Byte*,System.Int32,K4os.Compression.LZ4.LZ4Level)">
<summary>Compresses data from one buffer into another.</summary>
<param name="source">Input buffer.</param>
<param name="sourceLength">Length of input buffer.</param>
<param name="target">Output buffer.</param>
<param name="targetLength">Output buffer length.</param>
<param name="level">Compression level.</param>
<returns>Number of bytes written, or negative value if output buffer is too small.</returns>
</member>
<member name="M:K4os.Compression.LZ4.LZ4Codec.Encode(System.ReadOnlySpan{System.Byte},System.Span{System.Byte},K4os.Compression.LZ4.LZ4Level)">
<summary>Compresses data from one buffer into another.</summary>
<param name="source">Input buffer.</param>
<param name="target">Output buffer.</param>
<param name="level">Compression level.</param>
<returns>Number of bytes written, or negative value if output buffer is too small.</returns>
</member>
<member name="M:K4os.Compression.LZ4.LZ4Codec.Encode(System.Byte[],System.Int32,System.Int32,System.Byte[],System.Int32,System.Int32,K4os.Compression.LZ4.LZ4Level)">
<summary>Compresses data from one buffer into another.</summary>
<param name="source">Input buffer.</param>
<param name="sourceOffset">Input buffer offset.</param>
<param name="sourceLength">Input buffer length.</param>
<param name="target">Output buffer.</param>
<param name="targetOffset">Output buffer offset.</param>
<param name="targetLength">Output buffer length.</param>
<param name="level">Compression level.</param>
<returns>Number of bytes written, or negative value if output buffer is too small.</returns>
</member>
<member name="M:K4os.Compression.LZ4.LZ4Codec.Decode(System.Byte*,System.Int32,System.Byte*,System.Int32)">
<summary>Decompresses data from given buffer.</summary>
<param name="source">Input buffer.</param>
<param name="sourceLength">Input buffer length.</param>
<param name="target">Output buffer.</param>
<param name="targetLength">Output buffer length.</param>
<returns>Number of bytes written, or negative value if output buffer is too small.</returns>
</member>
<member name="M:K4os.Compression.LZ4.LZ4Codec.Decode(System.ReadOnlySpan{System.Byte},System.Span{System.Byte})">
<summary>Decompresses data from given buffer.</summary>
<param name="source">Input buffer.</param>
<param name="target">Output buffer.</param>
<returns>Number of bytes written, or negative value if output buffer is too small.</returns>
</member>
<member name="M:K4os.Compression.LZ4.LZ4Codec.Decode(System.Byte[],System.Int32,System.Int32,System.Byte[],System.Int32,System.Int32)">
<summary>Decompresses data from given buffer.</summary>
<param name="source">Input buffer.</param>
<param name="sourceOffset">Input buffer offset.</param>
<param name="sourceLength">Input buffer length.</param>
<param name="target">Output buffer.</param>
<param name="targetOffset">Output buffer offset.</param>
<param name="targetLength">Output buffer length.</param>
<returns>Number of bytes written, or negative value if output buffer is too small.</returns>
</member>
<member name="T:K4os.Compression.LZ4.LZ4Level">
<summary>Compression level.</summary>
</member>
<member name="F:K4os.Compression.LZ4.LZ4Level.L00_FAST">
<summary>Fast compression.</summary>
</member>
<member name="F:K4os.Compression.LZ4.LZ4Level.L03_HC">
<summary>High compression, level 3.</summary>
</member>
<member name="F:K4os.Compression.LZ4.LZ4Level.L04_HC">
<summary>High compression, level 4.</summary>
</member>
<member name="F:K4os.Compression.LZ4.LZ4Level.L05_HC">
<summary>High compression, level 5.</summary>
</member>
<member name="F:K4os.Compression.LZ4.LZ4Level.L06_HC">
<summary>High compression, level 6.</summary>
</member>
<member name="F:K4os.Compression.LZ4.LZ4Level.L07_HC">
<summary>High compression, level 7.</summary>
</member>
<member name="F:K4os.Compression.LZ4.LZ4Level.L08_HC">
<summary>High compression, level 8.</summary>
</member>
<member name="F:K4os.Compression.LZ4.LZ4Level.L09_HC">
<summary>High compression, level 9.</summary>
</member>
<member name="F:K4os.Compression.LZ4.LZ4Level.L10_OPT">
<summary>Optimal compression, level 10.</summary>
</member>
<member name="F:K4os.Compression.LZ4.LZ4Level.L11_OPT">
<summary>Optimal compression, level 11.</summary>
</member>
<member name="F:K4os.Compression.LZ4.LZ4Level.L12_MAX">
<summary>Maximum compression, level 12.</summary>
</member>
<member name="T:K4os.Compression.LZ4.LZ4Pickler">
<summary>
Pickling support with LZ4 compression.
</summary>
</member>
<member name="M:K4os.Compression.LZ4.LZ4Pickler.Pickle(System.Byte[],K4os.Compression.LZ4.LZ4Level)">
<summary>Compresses input buffer into self-contained package.</summary>
<param name="source">Input buffer.</param>
<param name="level">Compression level.</param>
<returns>Output buffer.</returns>
</member>
<member name="M:K4os.Compression.LZ4.LZ4Pickler.Pickle(System.Byte[],System.Int32,System.Int32,K4os.Compression.LZ4.LZ4Level)">
<summary>Compresses input buffer into self-contained package.</summary>
<param name="source">Input buffer.</param>
<param name="sourceOffset">Input buffer offset.</param>
<param name="sourceLength">Input buffer length.</param>
<param name="level">Compression level.</param>
<returns>Output buffer.</returns>
</member>
<member name="M:K4os.Compression.LZ4.LZ4Pickler.Pickle(System.ReadOnlySpan{System.Byte},K4os.Compression.LZ4.LZ4Level)">
<summary>Compresses input buffer into self-contained package.</summary>
<param name="source">Input buffer.</param>
<param name="level">Compression level.</param>
<returns>Output buffer.</returns>
</member>
<member name="M:K4os.Compression.LZ4.LZ4Pickler.Pickle(System.Byte*,System.Int32,K4os.Compression.LZ4.LZ4Level)">
<summary>Compresses input buffer into self-contained package.</summary>
<param name="source">Input buffer.</param>
<param name="sourceLength">Length of input data.</param>
<param name="level">Compression level.</param>
<returns>Output buffer.</returns>
</member>
<member name="M:K4os.Compression.LZ4.LZ4Pickler.Unpickle(System.Byte[])">
<summary>Decompresses previously pickled buffer (see: <see cref="T:K4os.Compression.LZ4.LZ4Pickler"/>.</summary>
<param name="source">Input buffer.</param>
<returns>Output buffer.</returns>
</member>
<member name="M:K4os.Compression.LZ4.LZ4Pickler.Unpickle(System.Byte[],System.Int32,System.Int32)">
<summary>Decompresses previously pickled buffer (see: <see cref="T:K4os.Compression.LZ4.LZ4Pickler"/>.</summary>
<param name="source">Input buffer.</param>
<param name="sourceOffset">Input buffer offset.</param>
<param name="sourceLength">Input buffer length.</param>
<returns>Output buffer.</returns>
</member>
<member name="M:K4os.Compression.LZ4.LZ4Pickler.Unpickle(System.ReadOnlySpan{System.Byte})">
<summary>Decompresses previously pickled buffer (see: <see cref="T:K4os.Compression.LZ4.LZ4Pickler"/>.</summary>
<param name="source">Input buffer.</param>
<returns>Output buffer.</returns>
</member>
<member name="M:K4os.Compression.LZ4.LZ4Pickler.Unpickle(System.Byte*,System.Int32)">
<summary>Decompresses previously pickled buffer (see: <see cref="T:K4os.Compression.LZ4.LZ4Pickler"/>.</summary>
<param name="source">Input buffer.</param>
<param name="sourceLength">Input buffer length.</param>
<returns>Output buffer.</returns>
</member>
</members>
</doc>