NG_Project/余坯替代——宽板/SlabWidThkHandle/SlabHandle/Enity/EP_REQ_SLAB_D.cs

using SOA.Persistent;
using System;
using System.Collections.Generic;
using System.ComponentModel;
using System.Linq;
using System.Text;
using System.Threading.Tasks;

namespace SlabHandle
{
    [Serializable, Table("EP_REQ_SLAB_D")]
    public class EP_REQ_SLAB_D
    {
        //申请日期
        [Persistent("REQ_SEQ_NO"), DisplayName("申请日期")]
        public string REQ_SEQ_NO { get; set; }


        //轧件分块顺序
        [Persistent("BLOCK_SEQ"), DisplayName("轧件分块顺序")]
        public string BLOCK_SEQ { get; set; }


        //顺序
        [Persistent("SEQ"), DisplayName("顺序")]
        public string SEQ { get; set; }


        //订单号
        [Persistent("ORD_NO"), DisplayName("订单号")]
        public string ORD_NO { get; set; }


        //订单序列号
        [Persistent("ORD_ITEM"), DisplayName("订单序列号")]
        public string ORD_ITEM { get; set; }


        //订单数量
        [Persistent("ORD_CNT"), DisplayName("订单数量")]
        public decimal ORD_CNT { get; set; }


        //过量生产代码
        [Persistent("OVER_FL"), DisplayName("过量生产代码")]
        public string OVER_FL { get; set; }


        //产品代码
        [Persistent("PROD_CD"), DisplayName("产品代码")]
        public string PROD_CD { get; set; }


        //钢种
        [Persistent("STLGRD"), DisplayName("钢种")]
        public string STLGRD { get; set; }


        //厚度
        [Persistent("THK"), DisplayName("厚度")]
        public Decimal THK { get; set; }


        //宽度
        [Persistent("WID"), DisplayName("宽度")]
        public Decimal WID { get; set; }


        //长度
        [Persistent("LEN"), DisplayName("长度")]
        public Decimal LEN { get; set; }


        //重量
        [Persistent("WGT"), DisplayName("重量")]
        public Decimal WGT { get; set; }


        //数量
        [Persistent("CNT"), DisplayName("数量")]
        public decimal CNT { get; set; }


        //控轧代码
        [Persistent("CR_CD"), DisplayName("控轧代码")]
        public string CR_CD { get; set; }


        //超声波探伤代码
        [Persistent("UST_FL"), DisplayName("超声波探伤代码")]
        public string UST_FL { get; set; }


        //切边代码
        [Persistent("TRIM_FL"), DisplayName("切边代码")]
        public string TRIM_FL { get; set; }


        //取样代码
        [Persistent("SMP_FL"), DisplayName("取样代码")]
        public string SMP_FL { get; set; }


        //取样位置
        [Persistent("SMP_LOC"), DisplayName("取样位置")]
        public string SMP_LOC { get; set; }


        //取样长度
        [Persistent("SMP_LEN"), DisplayName("取样长度")]
        public Decimal SMP_LEN { get; set; }


        //试样编号
        [Persistent("SMP_NO"), DisplayName("试样编号")]
        public string SMP_NO { get; set; }


        //录入日期
        [Persistent("INS_DATE"), DisplayName("录入日期")]
        public string INS_DATE { get; set; }


        //录入时刻
        [Persistent("INS_TIME"), DisplayName("录入时刻")]
        public string INS_TIME { get; set; }


        //变更程序ID
        [Persistent("UPD_PGMID"), DisplayName("变更程序ID")]
        public string UPD_PGMID { get; set; }


        //设计取样长度
        [Persistent("DESIGN_SMP_LEN"), DisplayName("设计取样长度")]
        public Decimal DESIGN_SMP_LEN { get; set; }


        //取样富余长度
        [Persistent("CUT_SPARE_LEN"), DisplayName("取样富余长度")]
        public Decimal CUT_SPARE_LEN { get; set; }


        //喷印1
        [Persistent("MARKING1"), DisplayName("喷印1")]
        public string MARKING1 { get; set; }


        //喷印2
        [Persistent("MARKING2"), DisplayName("喷印2")]
        public string MARKING2 { get; set; }


        //喷印3
        [Persistent("MARKING3"), DisplayName("喷印3")]
        public string MARKING3 { get; set; }


        //冲印
        [Persistent("STAMPING"), DisplayName("冲印")]
        public string STAMPING { get; set; }


        //侧喷
        [Persistent("EDGE_MARKING"), DisplayName("侧喷")]
        public string EDGE_MARKING { get; set; }


        //板坯切割顺序
        [Persistent("SLAB_CUT_SEQ"), DisplayName("板坯切割顺序")]
        public string SLAB_CUT_SEQ { get; set; }


        //板坯长度
        [Persistent("SLAB_LEN"), DisplayName("板坯长度")]
        public Decimal SLAB_LEN { get; set; }


        //板坯重量
        [Persistent("SLAB_WGT"), DisplayName("板坯重量")]
        public Decimal SLAB_WGT { get; set; }


        //热处理抛丸
        [Persistent("HTM_SHOT_BLAST"), DisplayName("热处理抛丸")]
        public string HTM_SHOT_BLAST { get; set; }


        //热处理方法1
        [Persistent("HTM_METH1"), DisplayName("热处理方法1")]
        public string HTM_METH1 { get; set; }


        //热处理条件1
        [Persistent("HTM_COND1"), DisplayName("热处理条件1")]
        public string HTM_COND1 { get; set; }


        //热处理方法2
        [Persistent("HTM_METH2"), DisplayName("热处理方法2")]
        public string HTM_METH2 { get; set; }


        //热处理条件2
        [Persistent("HTM_COND2"), DisplayName("热处理条件2")]
        public string HTM_COND2 { get; set; }


        //热处理方法3
        [Persistent("HTM_METH3"), DisplayName("热处理方法3")]
        public string HTM_METH3 { get; set; }


        //热处理条件3
        [Persistent("HTM_COND3"), DisplayName("热处理条件3")]
        public string HTM_COND3 { get; set; }


        //订单材/余材代码
        [Persistent("ORD_FL"), DisplayName("订单材/余材代码")]
        public string ORD_FL { get; set; }


        [Persistent("MID_SMP_LEN"), DisplayName("")]
        public Decimal MID_SMP_LEN { get; set; }


        //配置形状
        [Persistent("POSITION_TYPE"), DisplayName("配置形状")]
        public string POSITION_TYPE { get; set; }


        //X坐标
        [Persistent("POSITION_X"), DisplayName("X坐标")]
        public decimal POSITION_X { get; set; }


        //Y坐标
        [Persistent("POSITION_Y"), DisplayName("Y坐标")]
        public decimal POSITION_Y { get; set; }


        //使用FLG
        [Persistent("USE_FLG"), DisplayName("使用FLG")]
        public string USE_FLG { get; set; }

    }
}