diff --git a/余坯替代——宽板/SlabWidThkHandle/SlabHandle/SlabWidThkControler.cs b/余坯替代——宽板/SlabWidThkHandle/SlabHandle/SlabWidThkControler.cs
index 5457f5f..2972cc2 100644
--- a/余坯替代——宽板/SlabWidThkHandle/SlabHandle/SlabWidThkControler.cs
+++ b/余坯替代——宽板/SlabWidThkHandle/SlabHandle/SlabWidThkControler.cs
@@ -7064,6 +7064,23 @@ namespace SlabHandle
             }
 
             decimal decBroad = CAL_WID / TS.WID; //宽展系数
+
+            //2025-02-07 当轧件宽度减去设计的料型宽度(或坯料实际宽度)，≤30mm时，系统进行报错管控，防止出现小展宽比的设计出现
+            if (CAL_WID- TS.WID<=30)
+            {
+                return false;
+            }
+
+            //2025-02-07
+            //针对0好连铸机生产的370 / 460断面坯料，用来轧制特厚规格钢板，由于整体压下量相较薄规格小，轧制规程上对需要展宽的压缩量要求较高，
+            //为防止料型设计及余坯替代时选择料型不合适造成压下量过小展宽轧制不出来的情况，现需要对MES中: WEC1070C、WEF1520C、WEF1520C、
+            //这3个界面进行设计探讨时，
+            //用以下公式进行计算: (坯料厚度 * 坯料宽度 / 目标宽度) - 目标厚度 > 15mm，不满足这个公式情况下进行MES报警,
+            if (((TS.THK * TS.WID) / CAL_WID - BOI.ORD_THK) > 15)
+            {
+                return false;
+            }
+
             //2024-06-15  宽展比上线改成 2.0
             //if (decBroad > Convert.ToDecimal(2.7001))
             //{
diff --git a/余坯替代——宽板/SlabWidThkHandle/SlabHandle/bin/Debug/SlabHandle.exe b/余坯替代——宽板/SlabWidThkHandle/SlabHandle/bin/Debug/SlabHandle.exe
index 20ff29c..65717db 100644
Binary files a/余坯替代——宽板/SlabWidThkHandle/SlabHandle/bin/Debug/SlabHandle.exe and b/余坯替代——宽板/SlabWidThkHandle/SlabHandle/bin/Debug/SlabHandle.exe differ
diff --git a/余坯替代——宽板/SlabWidThkHandle/SlabHandle/bin/Debug/SlabHandle.pdb b/余坯替代——宽板/SlabWidThkHandle/SlabHandle/bin/Debug/SlabHandle.pdb
index 5c858bd..242e166 100644
Binary files a/余坯替代——宽板/SlabWidThkHandle/SlabHandle/bin/Debug/SlabHandle.pdb and b/余坯替代——宽板/SlabWidThkHandle/SlabHandle/bin/Debug/SlabHandle.pdb differ
diff --git a/余坯替代——宽板/SlabWidThkHandle/SlabHandle/obj/Debug/SlabHandle.exe b/余坯替代——宽板/SlabWidThkHandle/SlabHandle/obj/Debug/SlabHandle.exe
index 20ff29c..65717db 100644
Binary files a/余坯替代——宽板/SlabWidThkHandle/SlabHandle/obj/Debug/SlabHandle.exe and b/余坯替代——宽板/SlabWidThkHandle/SlabHandle/obj/Debug/SlabHandle.exe differ
diff --git a/余坯替代——宽板/SlabWidThkHandle/SlabHandle/obj/Debug/SlabHandle.pdb b/余坯替代——宽板/SlabWidThkHandle/SlabHandle/obj/Debug/SlabHandle.pdb
index 5c858bd..242e166 100644
Binary files a/余坯替代——宽板/SlabWidThkHandle/SlabHandle/obj/Debug/SlabHandle.pdb and b/余坯替代——宽板/SlabWidThkHandle/SlabHandle/obj/Debug/SlabHandle.pdb differ